80mm Duck Bill Spray Nozzle for Consistent Water Cart Coverage
08 October 2026
Order an 80mm duck bill spray nozzle from WACME for controlled water-cart coverage across Australia. Confirm product compatibility for your setup today.
Why Consistent Water-Cart Coverage Matters?
Uneven discharge can leave dry strips beside heavily saturated ground. This wastes tank capacity and may require extra passes across haul roads, construction zones, mine sites or agricultural areas.
Water application also needs to suit the surface and operating conditions. Too little water may fail to control airborne material, while excessive discharge can create runoff, soft ground or reduced traction. Safe Work Australia’s workplace exposure standards for airborne contaminants reinforce the need to control airborne contaminants rather than relying on visual judgement alone.
How Does an 80mm Duck Bill Spray Nozzle Distribute Water?
The flattened outlet directs water across a wider area than a narrow, concentrated stream. This discharge shape can suit water-cart applications that require broad ground coverage behind or beside the vehicle.
Nominal outlet size does not determine the final spray width by itself. Pump output, pipe diameter, valve position, mounting angle and travel speed all influence the pattern reaching the ground. Operators should therefore assess the nozzle as one part of the complete water-delivery system.
WACME lists the 80mm duck bill spray nozzle under WET1 spray heads and spray valves. The published listing identifies part number W1-SWD-080-RG, a weight of 1 kg and shipping dimensions of 15 cm by 16 cm by 20 cm.
What Should Buyers Check Before Ordering?
A basic system check can reduce ordering errors and installation delays. Record the existing configuration and normal operating conditions before selecting a replacement nozzle.
- Connection requirements: Confirm the pipe diameter, fitting type and mounting arrangement already fitted to the cart.
- Available flow: Record normal pump output and operating pressure instead of relying only on maximum pump capacity.
- Coverage target: Define the required spray direction, approximate width and overlap at the usual vehicle speed.
- Water condition: Note sediment, recycled water or other material that could contribute to blockage or internal wear.
- Valve configuration: Check how the outlet connects to the existing spray valve, pipework and control system.
- Installation clearance: Measure the available space around the outlet, chassis and nearby components.
These details allow the supplier to assess compatibility more accurately. Buyers planning a wider system update can also inspect our pumps and spray units before ordering individual parts.
Improving Spray Coverage During Operation
An 80mm duck bill spray nozzle cannot compensate for restricted pipework, unstable pressure or incorrect positioning. Mounting height, discharge angle and overlap between spray points need to match the cart and the intended treatment area.
Our guide to high-performance spray valves for Australian water carts explains how flow control affects water use and coverage. Routine checks across the pump, valves and outlets can identify issues before they interrupt site operations.
Order Water-Cart Spray Parts in Australia
Accurate coverage begins with a compatible component and a properly configured system. Confirm the connection, pump conditions, mounting position and target spray area before placing an order. WACME is the Australian OEM behind the WET1 range of tanker pumps, spray equipment, hose reels and water tankers.
Contact us to enquire about an 80mm duck bill spray nozzle and confirm the requirements for your water-cart setup.
Optimized by: Netwizard SEO
